9304 - 39 Avenue, Edmonton, Alberta, Canada
+1 780-485-0690
Degassing & Decontamination Services

Degassing and Decontamination

Degassing and decontamination is a single step process designed for fast and efficient—and therefore economical—process plant cleaning.

Using an enhanced steaming technique in which chemicals are injected into the steam stream, we are able to clean large process vessels, reactors, exchangers, and interconnecting piping. Degassing and decontamination is most often used for post-operational cleaning to remove H2S, benzene, LELs, pyrophoric iron, mercaptans, and ammonia.

Degassing is a chemical cleaning technique that reduces the hazards of dangerous gaseous elements inside petro-chemical processing equipment. To improve the degassing process, it is often recommended that decontamination (solvent circulation) precede degassing to minimize the source of contamination (e.g., sludge, heavy deposits, etc.). Using FQE® Chemicals specially designed chemicals can provide a safe environment for vessel maintenance. This process reduces both the amount of waste and human exposure to dangerous substances during cleaning and maintenance work.

Learn more about degassing chemicals

FQE LEL-V
FQE H2S
FQE Pyrophoric

More Degassing & Decontamination Content

INDUSTRY INSIGHT

Liquid Circulation vs. Degassing
Each of these methods has preferential applications where it will prevail over the other due to certain design limitations (eg. No steam available, waste disposal, vessels not connected to flare, etc.).
ii
CASE STUDY

Degassing and Decontamination of a Crude Unit
This was the first vapour-phase application where the entire crude unit was to be degassed and decontaminated simultaneously. Previously, the client had broken down the unit into separate individual...
INDUSTRY INSIGHT

Vapour Phase Cleaning (Degassing)
Improved safety regulations, mandatory vessel inspections, and new environmental requirements are increasing the demand for system decontamination in the oil and gas industry.

Degassing

Degassing requires a preparatory injection of plant steam into the vessels to bring the system temperature up to a sufficient level (~90oC) in order to increase the effect of the chemistry and ensure that the maximum amount of organic material will be removed. The higher temperature helps loosen any of the system contaminants and expedite their removal. The chemistry, mixed with the steam, travels upward through the vessels before condensing and cascading down the vessel walls.  In order to confirm proper chemical distribution, the chemistry should be exiting from both the top of the vessel with the steam, and from the bottom of the vessel as condensate.

The precise steam flow rates and combined chemical injection rates that are required are determined during the detailed engineering and procedure generation process. Steam phase cleaning can target the removal of LELs, H2S, iron sulphide, ammonia, and mercaptans.

Explanation of points and results

Degassing and Decontamination Explanation

Request More Information

Looking for more information on this service line? Use the form to the right to be contacted by a member of our Technical Sales Team. For additional information like brochures and case histories, visit our Resource Library