Carrières

The Field Technician performs hands-on field work in support of industrial service projects. This position works under the direction of the Field Supervisor or Project Manager and assists with equipment setup, operation, maintenance, troubleshooting, and project execution at customer facilities.

Key Responsibilities

• Assist with mobilization and demobilization of equipment and materials.
• Load, unload, stage, assemble, and organize equipment at project locations.
• Set up hoses, pumps, piping, filtration equipment, fittings, valves, and other project equipment as directed.
• Operate company equipment after receiving appropriate training and authorization.
• Inspect tools and equipment before use and report damaged or unsafe equipment.
• Follow instructions provided by the Field Supervisor and project leadership.
• Participate in pre-job safety meetings, toolbox talks, and JSAs/JHAs.
• Follow all company and customer safety policies and procedures.
• Wear required PPE and maintain a safe work area.
• Assist with equipment cleaning, maintenance, and basic troubleshooting.
• Monitor equipment during operations and immediately report abnormalities or problems.
• Maintain tools, equipment, vehicles, and work areas in clean and organized condition.
• Assist with inventory and ensure equipment is accounted for during mobilization and demobilization.
• Accurately complete timesheets and other required field documentation.
• Communicate safety concerns, equipment issues, or changes in field conditions to supervision.
• Work effectively as part of a field crew.
• Perform additional duties as assigned based on project requirements.

Qualifications

• High school diploma or equivalent preferred.
• Previous industrial, mechanical, construction, or field-service experience preferred but not always required.
• Mechanical aptitude and willingness to learn industrial equipment and processes.
• Ability to follow verbal and written instructions.
• Ability to work safely in industrial environments.
• Ability to perform physically demanding work, including standing, walking, bending, climbing, and lifting.
• Ability to work outdoors and in varying weather conditions.
• Ability to work extended hours, nights, weekends, and varying shifts as project requirements dictate.
• Ability and willingness to travel and stay out of town for project assignments.
• Valid driver’s license preferred.
• Must be able to meet applicable customer site-access, training, background, and drug-testing requirements.

The Field Supervisor provides on-site leadership and supervision for field projects. This position is responsible for coordinating crews, equipment, materials, safety, and daily activities to ensure work is completed safely, efficiently, and according to the approved project scope and customer requirements.

Key Responsibilities

• Supervise and direct field personnel during project execution.
• Serve as the primary on-site contact between field crews, Project Management, Operations, and customer representatives.
• Conduct daily pre-job meetings, toolbox talks, and work assignments.
• Ensure employees understand the scope of work and their individual responsibilities.
• Monitor work progress and communicate project status to management.
• Ensure company and customer safety procedures are followed at all times.
• Verify employees have appropriate PPE, training, certifications, and site access.
• Inspect equipment before and during operations to ensure safe and proper use.
• Coordinate equipment setup, operation, troubleshooting, and demobilization.
• Monitor labor hours, equipment usage, materials, and project productivity.
• Complete and submit daily reports, timesheets, LEMs, JSAs/JHAs, and other required documentation.
• Immediately report safety incidents, equipment problems, delays, or changes in scope.
• Coordinate with the Project Manager regarding additional manpower, equipment, or materials.
• Maintain good communication and professional relationships with customers.
• Ensure company equipment and work areas are maintained in a clean and organized condition.
• Provide guidance and training to Field Technicians.
• Ensure project equipment and materials are accounted for before leaving the jobsite.
• Perform additional field responsibilities as required.

Qualifications

• Previous industrial field-service or supervisory experience preferred.
• Strong leadership and crew-management skills.
• Knowledge of industrial equipment, tools, and safe work practices.
• Ability to read procedures, drawings, work scopes, and safety documentation.
• Strong communication and problem-solving skills.
• Ability to work extended hours, nights, weekends, and varying shifts when required.
• Ability to travel and remain out of town for extended project assignments.
• Valid driver’s license required.
• Must be able to meet customer-specific background, drug-testing, training, and site-access requirements.
• OSHA and other applicable safety training preferred.

The Project Manager is responsible for planning, coordinating, and overseeing projects from initial preparation through completion. This position works closely with customers, operations, field personnel, engineering, purchasing, safety, and management to ensure projects are completed safely, efficiently, on schedule, and within budget.

Key Responsibilities

• Manage projects from planning and mobilization through execution, demobilization, and closeout.
• Review project scope, customer requirements, schedules, and deliverables.
• Develop project execution plans and coordinate manpower, equipment, materials, and subcontractors.
• Serve as a primary point of contact between the company and customer representatives.
• Coordinate with Field Supervisors and field personnel regarding daily project activities.
• Monitor project schedules, costs, labor hours, equipment usage, and overall performance.
• Identify project risks, delays, or operational issues and develop corrective actions.
• Ensure required equipment and materials are available before mobilization.
• Coordinate project kickoff meetings and communicate expectations to assigned personnel.
• Ensure customer site-entry requirements, training, documentation, and safety requirements are completed.
• Review daily reports, timesheets, LEMs, field documentation, and project records.
• Manage changes in project scope and communicate potential cost or schedule impacts.
• Support preparation of quotes, estimates, purchase requests, and project-related documentation.
• Maintain regular communication with customers regarding project progress and changes.
• Participate in project closeout and lessons-learned reviews.
• Ensure projects meet company quality, safety, and customer-service standards.
• Perform additional responsibilities as required based on project needs.

Qualifications

• Previous project management experience in industrial services, construction, maintenance, or a related field preferred.
• Strong leadership, planning, and organizational skills.
• Ability to manage multiple projects and changing priorities.
• Strong written and verbal communication skills.
• Understanding of project budgets, schedules, labor, and equipment planning.
• Ability to read project scopes, drawings, procedures, and technical documentation.
• Proficiency with Microsoft Office and project-management systems.
• Ability to travel to project sites as required.
• Valid driver’s license and ability to meet customer site-access requirements.

The Administrative Assistant provides day-to-day administrative and operational support to the office, field teams, and management. This position helps ensure paperwork, employee records, project documentation, purchasing information, travel arrangements, and communications are organized and completed accurately and on time.

Key Responsibilities

• Provide general administrative support to management and operations personnel.
• Assist with employee onboarding paperwork and required documentation.
• Maintain organized electronic and physical files.
• Assist with purchase orders, invoices, receipts, and expense documentation.
• Coordinate travel arrangements, including flights, hotels, and rental vehicles.
• Assist with timesheets, employee records, and project documentation.
• Help coordinate drug testing, training, site-access requirements, and employee certifications.
• Prepare emails, reports, spreadsheets, and other business documents.
• Maintain project and personnel information in company systems.
• Communicate with employees, vendors, customers, and internal departments as needed.
• Track outstanding paperwork and follow up to ensure completion.
• Assist with office supplies, equipment, and general office organization.
• Maintain confidentiality of employee and company information.
• Perform additional administrative duties as assigned.

Qualifications

• High school diploma or equivalent required.
• Previous administrative or office experience preferred.
• Strong organizational and communication skills.
• Proficient with Microsoft Outlook, Word, Excel, and Teams.
• Ability to manage multiple priorities and meet deadlines.
• Strong attention to detail and recordkeeping skills.
• Ability to work independently and as part of a team.

Position Summary

Regional Controller is responsible for the full cycle accounting for FourQuest Energy entities in our WEST division. The position is based in the Edmonton, and is involved in intercompany and international accounting and payroll functions.

Duties & Responsibilities

• manage a team of 5 accountants
• full cycle accounting
  • complete bank recs, schedules, and government remittances
  • reviewing employees work: accounts payable, accounts receivable, payroll
• compile and analyze financial information to prepare financial statements including monthly and annual accounts
• ensure financial records are maintained in compliance with accepted policies and procedures
• ensure all financial reporting deadlines are met
• ensure accurate and timely monthly, quarterly and year end close
• establish and monitor the maintenance of accounting control procedures
• maintain financial data bases
• ensure accurate and appropriate recording and analysis of revenues and expenses

Formation et expérience

• knowledge of accepted accounting practices and principles
• Bachelor’s degree in Accounting or similar
• CPA designation

Skills & Abilities

• attention to detail and accuracy
• planning and organizing
• strong communication skills
• information and task monitoring
• problem analysis, judgment and problem-solving
• supervisory skills & stress tolerance

Position Summary

A technical specialist role acting as the liaison between Operations and the client. Scope includes engineering and developing procedures based on client requests, supporting job completion, building plans, and recommending procedural changes to clients and project managers.

Principales responsabilités

Engineering Procedures (45%)

• Develop cleaning, flushing, testing, and other specialized procedures.
• Solve problems involving momentum, mass and energy transport, fluid flow in piping, fluid mixing, and compressibility using chemistry, physics, mathematics, and engineering principles.
• Perform engineering calculations: cleaning force ratio, compressible and non-compressible flow, fluid velocity, volume and mass flow rates, reaction force, heat and mass transfer.
• Develop non-standard service procedures.

Technical Liaison (15%)

• Discuss procedures, processes, and requirements with clients to develop cleaning plans.
• Make process and procedural recommendations to clients.
• Assurer la liaison entre les opérations et les clients sur site.
• Report project status to Operations and clients.

Management of Engineering Resources (15%)

• Manage procedure execution, equipment, and manpower alongside the Project Manager.
• Supervise on-site execution of procedures to ensure Operations meets client needs.
• Examiner et approuver les procédures et les modifications apportées aux procédures par les ingénieurs de terrain.
• Vérifier la logistique des procédures d'ingénierie.

Sales Support (10%)

• Assess requests for bids; develop methodology and determine equipment, materials, and manpower needs.
• Research and coordinate equipment and materials from vendors.
• Liaise with Operations, Sales, and Proposals on RFQ preparation.
• Attend sales meetings and present to clients.

Health & Safety (5%)

• Adhere to all safety legislation and FourQuest HSE policies.
• Communicate HSE issues or concerns to management with constructive solutions.
• Ensure client safety obligations are met per agreement terms.

Other (10%)

• Work with Engineering leadership on setting, executing, and monitoring business goals and policies.
• Adhere to FourQuest’s Quality Management Systems.
• Perform other duties as assigned.

Exigences

Éducation

• Required: University degree in Engineering Sciences (Chemical or Mechanical).

Certifications

• Required: EIT designation (P.E. is an asset).
• Required: Class 5 driver’s license.

Expérience

• 3–5 years in Oil & Gas field service related to FourQuest’s service lines.
• 3–5 years in Commissioning, Pre-commissioning, and/or Start-Up.
• Eligible for P.E. or EIT status.

Autres exigences

• Legally able to work in Canada.
• Able to travel and work internationally.
• Valid passport (or able to obtain one).
• Able to pass regular drug and alcohol testing.
• Able to pass a background security check.

Attributs

Caractéristiques personnelles

• Highest level of integrity and honesty.
• Goal-oriented, self-motivated, persistent, and determined.
• High energy and activity levels.
• Rechercher les résultats commerciaux et l'apprentissage continu.
• Entrepreneurial mindset.
• Collaborative team player.

Position-Specific Abilities

• Strong customer focus and relationship-building skills.
• Clear, concise verbal communication.
• Well-developed written communication.
• Ability to work efficiently under pressure.
• Strong attention to detail.
• Ability to multitask, prioritize, and stay organized.
• Physical stamina for repetitive tasks.
• Solid critical thinking, analytical, and decision-making skills.

Communication

Conditions de travail

Schedule

• Field: ~50% of time on job site, up to 12-hour days.
• Office: Monday–Friday, 8:00 AM–5:00 PM.
• Weekends as required.
• Flexible schedule with last-minute travel depending on client demand.

Travel

• On client sites 50–75% of the time (up to 40 weeks per year).

Supervision

• Monitors the work of others as assigned; may perform similar duties.
• Plans project work.
• Acts as a lead without full supervisory authority.

Work Environment

• Regular periods of intense concentration on complex tasks.
• On-the-spot decisions and rapid turnaround.
• Pressure to produce tangible results.
• Manages moderately complex crisis situations.

Physical Demands

• Lifting and carrying up to 40 lbs.
• Sitting, walking, standing, and bending regularly.
• Working on wet, slippery floors and uneven ground.
• Working near heavy tools and moving machinery.
• Exposure to chemical substances (acids, bases).
• Exposure to all weather conditions, dirt, dust, and noise.
• Combination of inside and outside work.

Autonomy & Decision-Making

• Decisions affect the employee’s position and similar roles.
• Decisions impact specific jobs, not the company overall.
• Makes technical recommendations for equipment, materials, and manpower.
• Revises procedures and job scope.
• Handles technical or minor contractual issues with clients.
• Reviews process and job requirements in consultation with the Engineering Manager or Team Lead.

Résumé

Assister les superviseurs et les ingénieurs sur le terrain dans la réalisation des activités de pré-mise en service et de maintenance chez les clients. Fournir un soutien sur le terrain pour les services en amont et en aval.

Principales responsabilités

HSE

• Toutes les tâches doivent être accomplies de manière sûre et efficace, conformément au programme de sécurité comportementale de FourQuest.
• Participez aux réunions d'équipe au début du quart de travail.
• Participer à l'évaluation des risques sur le terrain (FLRA) et en assurer la révision.
• Veiller au respect de toutes les lois en matière de sécurité et participer activement à toutes les politiques et pratiques de FourQuest en matière de santé et de sécurité.

Équipement

• Aider à effectuer les opérations de base sur les équipements sous supervision.
• Assist in preparing equipment, materials and supplies needed per job.
• Aider les autres techniciens à utiliser le matériel de repérage lorsque cela est nécessaire.
• Assist in performing basic operation of equipment.
• Aider à tenir des registres détaillés sur le débit, la température et la pression.
• Aider à contrôler, surveiller et mesurer les équipements, les instruments et les systèmes informatiques.
• Aider à surveiller les instruments qui fournissent des informations sur les niveaux de produit dans les réservoirs, ainsi que sur les débits, les pressions, les volumes, les densités et les températures.
• Aider à surveiller les panneaux de commande et les commandes des équipements d'exploitation.
• Keep records and prepare reports about service operations.
• Sous supervision, entretenir, réparer et dépanner les équipements. Effectuer des réparations mineures si nécessaire.
• Receive equipment and materials at job sites.
• Aider à l'installation du matériel.
• Sous supervision, charger, assembler, démonter et entretenir l'équipement.

Formation et expérience

• +2 years in a Field Technician position within a similar industry (industrial cleaning, shutdown/ turnaround/ pre commissioning/ PPS services)
• Diplôme d'études secondaires
• Mechanical aptitude is an asset.
• Required valid OGUK medical, OPITO BOSIET & H2S

Attributs

Caractéristiques personnelles

• Faites preuve du plus haut niveau d'intégrité et d'honnêteté.
• Axé sur les objectifs à atteindre grâce à une équipe de professionnels de la vente désignés.
• Motivé, entreprenant, persévérant et déterminé.
• Faites preuve d'un niveau élevé d'énergie et d'activité.
• Rechercher les résultats commerciaux et l'apprentissage continu.
• Favorisez l'esprit d'équipe en travaillant en collaboration avec les autres.

Compétences professionnelles

• Bonnes aptitudes à la communication pour comprendre des instructions concises.
• Bonnes capacités d'analyse et de prise de décision.
• Endurance physique et résistance nécessaires pour effectuer des tâches répétitives.
• Aptitude mécanique et capacité à visualiser le fonctionnement des outils.
• Capacité à travailler efficacement et efficacement sous pression.
• Capacité à prêter une attention particulière aux détails.
• Capacité à travailler seul et avec d'autres personnes.
• Capacité à mener plusieurs tâches de front, à établir des priorités et à faire preuve de solides compétences organisationnelles.

Résumé

The experienced field supervisor is responsible for the planning, execution, technical oversight, safety and compliance of oil flushing. Provide oil flushing technical guidance and support to Field Technicians. Provide mentoring and coaching through on the job training and experience to increase their knowledge and abilities as well as review completed work. Ongoing communication with the client building relationships and overseeing jobs on site.

Principales responsabilités

• Supervise and oversee N2He leak test projects and employees on job sites.
• Fournir une formation technique pratique en rapport avec les services de l'entreprise.
• Keep records and prepare reports about service operations. I.E. daily progress reports, personnel, equipment & consumable reports, etc…
• Participer à l'élaboration des procédures sur le terrain avec les ingénieurs de terrain et de projet.
• Prepare equipment, materials and supplies needed per job.
• Receive equipment and materials at job sites.
• Assist and guide others in equipment set up.
• Entretenir, réparer et dépanner les équipements.
• Participate in and lead shift tool box meetings and shift handovers.
• Participer et maintenir les évaluations des risques sur le terrain (FLRA).
• Veiller à ce que toutes les politiques et pratiques en matière de santé et de sécurité soient respectées.
• Toutes les tâches doivent être accomplies de manière sûre et efficace, conformément au programme de sécurité comportementale de FourQuest.

Formation et expérience

• Minimum 5 years experience at supervisor level
• Understanding of the execution of oil flushing services.
• Knowledge of pre-commissioning, process & pipeline services.
• Mechanical aptitude is an asset.
• Required valid OGUK medical, OPITO BOSIET & H2S

Attributs

Caractéristiques personnelles

• Faites preuve du plus haut niveau d'intégrité et d'honnêteté.
• Axé sur les objectifs à atteindre grâce à une équipe de professionnels de la vente désignés.
• Motivé, entreprenant, persévérant et déterminé.
• Faire preuve d'un niveau élevé d'énergie et d'activité.
• Rechercher les résultats commerciaux et l'apprentissage continu.
• Favorisez l'esprit d'équipe en travaillant en collaboration avec les autres.

Compétences professionnelles

• Aptitudes mécaniques et capacité à résoudre les problèmes liés aux équipements si nécessaire.
• Capacité à prêter une attention particulière aux détails.
• Capacité à travailler seul et avec d'autres personnes.
• Bonnes aptitudes à la communication pour comprendre des instructions concises.
• Capacité à travailler efficacement et efficacement sous pression.
• Endurance physique et résistance nécessaires pour effectuer des tâches répétitives.

Résumé

The experienced field supervisor is responsible for the planning, execution, technical oversight, safety and compliance of oil flushing. Provide oil flushing technical guidance and support to Field Technicians. Provide mentoring and coaching through on the job training and experience to increase their knowledge and abilities as well as review completed work. Ongoing communication with the client building relationships and overseeing jobs on site.

Principales responsabilités

• Supervise and oversee oil flushing projects and employees on job sites.
• Fournir une formation technique pratique en rapport avec les services de l'entreprise.
• Keep records and prepare reports about service operations. I.E. daily progress reports, personnel, equipment & consumable reports, etc…
• Participer à l'élaboration des procédures sur le terrain avec les ingénieurs de terrain et de projet.
• Prepare equipment, materials and supplies needed per job.
• Receive equipment and materials at job sites.
• Assist and guide others in equipment set up.
• Entretenir, réparer et dépanner les équipements.
• Participate in and lead shift tool box meetings and shift handovers.
• Participer et maintenir les évaluations des risques sur le terrain (FLRA).
• Veiller à ce que toutes les politiques et pratiques en matière de santé et de sécurité soient respectées.
• Toutes les tâches doivent être accomplies de manière sûre et efficace, conformément au programme de sécurité comportementale de FourQuest.

Formation et expérience

• Minimum 5 years experience at supervisor level
• Understanding of the execution of oil flushing services.
• Knowledge of pre-commissioning, process & pipeline services.
• Mechanical aptitude is an asset.
• Required valid OGUK medical, OPITO BOSIET & H2S

Attributs

Caractéristiques personnelles

• Faites preuve du plus haut niveau d'intégrité et d'honnêteté.
• Axé sur les objectifs à atteindre grâce à une équipe de professionnels de la vente désignés.
• Motivé, entreprenant, persévérant et déterminé.
• Faire preuve d'un niveau élevé d'énergie et d'activité.
• Rechercher les résultats commerciaux et l'apprentissage continu.
• Favorisez l'esprit d'équipe en travaillant en collaboration avec les autres.

Compétences professionnelles

• Aptitudes mécaniques et capacité à résoudre les problèmes liés aux équipements si nécessaire.
• Capacité à prêter une attention particulière aux détails.
• Capacité à travailler seul et avec d'autres personnes.
• Bonnes aptitudes à la communication pour comprendre des instructions concises.
• Capacité à travailler efficacement et efficacement sous pression.
• Endurance physique et résistance nécessaires pour effectuer des tâches répétitives.

Job Summary

The Experienced Field Engineer is responsible for the engineering, planning, execution, and technical oversight of chemical cleaning, high pressure cleaning, and hydrotesting scopes on industrial, pipeline, and facility projects. This role bridges engineering and field execution, ensuring work is performed safely, efficiently, and in compliance with client specifications, regulatory requirements, and company standards.

Key Responsibilities

• Provide field engineering support for chemical cleaning, high pressure cleaning, and hydrotesting activities.
• Develop, review, and implement job-specific procedures, method statements, and work packs.
• Perform system walkdowns, identify tie‑in points, venting, draining, and isolation requirements.
• Support and oversee chemical cleaning operations including circulation, flushing, passivation, and preservation.
• Support and oversee high pressure cleaning activities including vessel, exchanger, piping, and system cleaning.
• Plan and execute hydrostatic testing activities including filling, pressurization, strength testing, leak testing, and depressurization.
• Ensure accurate data capture, pressure charts, test records, and final documentation.
• Coordinate with supervisors, technicians, clients, and other disciplines during execution.
• Provide technical troubleshooting and problem-solving during field execution.
• Ensure all work complies with approved permits, procedures, and safety requirements.

Technical Scope of Work

• Chemical cleaning of vessels, exchangers, piping, and process systems
• High pressure water jetting and hydroblasting (typically 5,000 – 40,000 PSI)
• System flushing, filtration, drying, and preservation
• Hydrostatic testing of pipelines, vessels, and systems
• Review of P&IDs, isometrics, test limits, and system boundaries

Safety and Quality Responsibilities

• Promote and enforce a strong safety culture across all field activities.
• Ensure compliance with Health, Safety, and Environmental (HSE) policies and client requirements.
• Participate in and lead hazard assessments, FLHAs, and toolbox talks.
• Verify isolation, lockout/tagout, confined space, and pressure control requirements.
• Exercise stop‑work authority when unsafe conditions are identified.

Required Qualifications and Experience

• Engineering degree or technical diploma with relevant industry experience.
• Minimum 5–10 years of experience in chemical cleaning, high pressure cleaning, and/or hydrotesting.
• Strong understanding of pressure testing principles, system integrity, and cleaning methodologies.
• Experience working on industrial facilities, pipelines, and turnaround projects.
• Ability to work independently in the field and make sound technical decisions.

Preferred Training and Certifications

• Hydrotesting / Pressure Testing certification or equivalent experience
• Chemical Cleaning or Pre‑Commissioning training
• High Pressure Water Jetting awareness or certification
• Confined Space Entry (Supervisor or Entry level as applicable)
• H2S Alive, First Aid / CPR, and Lockout / Tagout training

Work Environment and Conditions

This role involves working in active industrial environments, including outdoor sites, construction areas, and operating facilities. The Field Engineer must be capable of working extended hours, traveling to project sites, and supporting both day and night operations as required.

Authority to Stop Work

The Experienced Field Engineer has the authority and responsibility to stop work if conditions are unsafe or if procedures are not being followed.

Job Summary

The Chemical Cleaning Technician supports and executes chemical cleaning activities on industrial piping, vessels, tanks, and process systems. This role involves operating temporary chemical cleaning equipment, handling chemicals safely, and performing cleaning tasks in accordance with approved procedures, permits, and safety requirements.

Key Responsibilities

• Assist with the setup, operation, and teardown of chemical cleaning equipment including pumps, heaters, filters, hoses, and tanks.
• Perform chemical cleaning tasks such as flushing, circulation, degreasing, pickling, passivation, rinsing, and preservation as directed.
• Safely handle, mix, inject, and transfer chemical solutions in accordance with procedures and SDS requirements.
• Monitor operating parameters such as flow rates, temperature, pressure, and pH during cleaning operations.
• Collect samples and assist with cleanliness verification and documentation.
• Inspect hoses, fittings, and temporary equipment prior to use and report defects immediately.
• Maintain proper containment, spill control, and housekeeping throughout the job.
• Communicate effectively with supervisors and team members during execution.
• Stop work and report unsafe conditions or deviations from procedures immediately.

Typical Work Scope

• Chemical cleaning of piping systems, vessels, tanks, and heat exchangers
• Alkaline degreasing, acid cleaning, pickling, and passivation
• System flushing, filtration, drying, and preservation
• Support of turnarounds, shutdowns, and new construction projects

Safety and Environmental Responsibilities

• Comply with all Health, Safety, and Environmental (HSE) policies and procedures.
• Wear required PPE including chemical resistant clothing, gloves, eye and face protection, and respiratory protection as required.
• Participate in toolbox talks, hazard assessments, and safety meetings.
• Follow confined space, lockout/tagout, and permit‑to‑work requirements when applicable.
• Respond appropriately to spills, leaks, and emergency situations.

Required Qualifications and Experience

• Previous industrial or chemical cleaning experience preferred.
• Ability to understand and follow written procedures and supervisor instructions.
• Physically capable of performing manual work in industrial environments.
• Strong awareness of chemical hazards and safe work practices.

Preferred Training and Certifications

• Chemical Cleaning or Industrial Cleaning training
• Confined Space Entry (Entrant level)
• H2S Alive or equivalent
• First Aid / CPR
• WHMIS or equivalent chemical handling training

Work Environment and Conditions

This position involves working in industrial facilities, construction sites, and turnaround environments. The Chemical Cleaning Technician must be able to work extended hours, perform physically demanding tasks, and wear PPE for extended periods.

Job Summary

The Chemical Cleaning Supervisor is responsible for supervising and executing chemical cleaning operations on industrial facilities, pipelines, vessels, exchangers, and process systems. This role ensures chemical cleaning activities are performed safely, efficiently, and in accordance with approved procedures, client specifications, and regulatory requirements.

Key Responsibilities

• Supervise chemical cleaning crews during mobilization, execution, and demobilization phases.
• Implement and enforce approved chemical cleaning procedures and method statements.
• Coordinate daily work activities including manpower, equipment, chemicals, and consumables.
• Oversee system preparation including isolation, draining, venting, and installation of temporary equipment.
• Direct chemical cleaning activities such as circulation, flushing, degreasing, pickling, passivation, and preservation.
• Monitor chemical parameters including pH, temperature, flow rates, and cleanliness criteria.
• Ensure proper handling, storage, mixing, injection, and disposal of chemicals and waste streams.
• Conduct pre‑job safety meetings, toolbox talks, and hazard assessments.
• Maintain clear communication with clients, engineers, safety personnel, and supporting trades.
• Stop work immediately if unsafe conditions or deviations from procedures are identified.

Typical Work Scope

• Chemical cleaning of piping systems, vessels, tanks, and heat exchangers
• Alkaline degreasing, acid cleaning, pickling, and passivation
• System flushing, filtration, and preservation
• Coordination with high pressure cleaning, air blowing, and hydrotesting activities
• Support of turnarounds, shutdowns, and new construction projects

Safety and Environmental Responsibilities

• Enforce company Health, Safety, and Environmental (HSE) policies and procedures.
• Ensure spill containment, environmental controls, and emergency response measures are in place.
• Verify compliance with confined space, lockout/tagout, and permit‑to‑work systems.
• Ensure personnel use appropriate PPE including chemical resistant clothing and respiratory protection.
• Report and investigate incidents, near misses, and unsafe conditions.

Required Qualifications and Experience

• Minimum 5 years of experience in chemical cleaning or industrial cleaning operations.
• Previous supervisory or lead‑hand experience required.
• Strong understanding of chemical cleaning processes and hazards.
• Ability to read and interpret P&IDs, procedures, and job plans.
• Strong leadership, communication, and organizational skills.

Preferred Training and Certifications

• Chemical Cleaning or Pre‑Commissioning training
• Confined Space Entry (Supervisor level)
• H2S Alive or equivalent
• First Aid / CPR
• Lockout / Tagout and hazard assessment training

Work Environment and Conditions

This position involves working in industrial environments, including operating facilities, construction sites, and turnaround projects. The Chemical Cleaning Supervisor must be capable of working extended hours, supervising multiple crews, and responding to changing site conditions.

Job Summary

The High Pressure Cleaning Industrial Technician performs high pressure water cleaning activities in industrial environments, including turnarounds and maintenance events. The Technician operates high pressure cleaning equipment and tooling while following approved procedures, permits, and safety requirements.

Key Responsibilities

• Operate high pressure water jetting and hydroblasting equipment under supervision.
• Assist with setup, operation, and teardown of high pressure pumps, hoses, and tooling.
• Perform cleaning of tanks, vessels, exchangers, piping, and equipment as directed.
• Inspect hoses, fittings, and tools prior to use and report defects immediately.
• Maintain safe hose management, body positioning, and exclusion zones during operation.
• Follow confined space entry, lockout/tagout, and isolation requirements when applicable.
• Maintain continuous communication with supervisors and team members.
• Stop work and report unsafe conditions immediately.
• Complete job documentation, inspections, and housekeeping duties as assigned.

Typical Work Scope

• High pressure water jetting (5,000 – 40,000 PSI)
• Tank, vessel, and exchanger cleaning
• Line and piping cleaning
• Hydroblasting and hydrolazing operations
• Support of confined space entry and vacuum truck operations

Safety Responsibilities

• Comply with all Health, Safety, and Environmental (HSE) policies and procedures.
• Wear required PPE including cut-resistant clothing, face protection, and respiratory protection.
• Participate in toolbox talks, hazard assessments, and safety meetings.
• Understand high pressure water jetting hazards and control measures.
• Follow emergency response and rescue procedures.

Required Qualifications

• Previous industrial or high pressure cleaning experience preferred.
• Ability to understand job procedures and follow instructions.
• Physically capable of performing manual work in industrial environments.
• Valid site-required safety certifications.

Preferred Training and Certifications

• High Pressure Water Jetting Operator certification (Preferred)
• Confined Space Entry
• H2S Alive or equivalent
• First Aid / CPR
• Lockout / Tagout awareness

Physical and Work Conditions

This position requires working in industrial environments, including outdoors, at heights, and in proximity to high energy equipment. The Technician must be physically capable of lifting hoses, working in awkward positions, and wearing PPE for extended periods.

Job Summary

The High Pressure Cleaning Industrial Supervisor is responsible for planning, supervising, and executing high pressure water cleaning activities in industrial environments. This role ensures work is performed safely, efficiently, and in compliance with company procedures, client requirements, and applicable regulations.

Key Responsibilities

• Supervise high pressure cleaning crews during industrial cleaning, turnaround, and maintenance activities.
• Plan and coordinate daily work scopes, manpower, equipment, and consumables.
• Ensure all high pressure cleaning activities are conducted in accordance with approved procedures and permits.
• Verify equipment selection, pressure ratings, and tooling are appropriate for the scope of work.
• Conduct pre-job safety meetings, toolbox talks, and hazard assessments.
• Ensure compliance with lockout/tagout, isolation, and confined space requirements when applicable.
• Monitor work execution to ensure safe distances, exclusion zones, and proper hose management are maintained.
• Maintain clear communication with clients, project management, and supporting trades.
• Stop work immediately if unsafe conditions are identified and implement corrective actions.
• Complete daily reports, job documentation, and incident reports as required.

Typical Work Scope

• High pressure water jetting and hydroblasting (5,000 – 40,000 PSI)
• Tank, vessel, and exchanger cleaning
• Line and piping cleaning
• Turnaround and shutdown cleaning support
• Coordination with confined space entry and vacuum truck operations

Safety and Compliance Responsibilities

• Enforce company Health, Safety, and Environmental (HSE) policies at all times.
• Ensure all personnel are trained and competent for assigned tasks.
• Verify PPE requirements including cut-resistant clothing, face protection, and respiratory protection.
• Ensure exclusion zones and barricades are established and maintained.
• Confirm emergency response and rescue plans are in place prior to work start.

Required Qualifications and Experience

• Minimum 3–5 years of industrial high pressure cleaning experience.
• Previous supervisory or lead-hand experience preferred.
• Strong understanding of high pressure water jetting hazards and controls.
• Ability to read and understand P&IDs, procedures, and job plans.
• Valid safety certifications as required by site or client.

Preferred Training and Certifications

• High Pressure Water Jetting Supervisor or Operator certification
• Confined Space Entry (Supervisor level)
• H2S Alive or equivalent
• First Aid / CPR
• Lockout / Tagout and hazard assessment training

Physical and Work Conditions

This position requires working in industrial environments, including outdoors, at heights, and in proximity to high energy equipment. The Supervisor must be physically capable of accessing work areas and wearing required PPE for extended periods.

Work Scope: Vessels, Tanks, and Similar Confined Spaces

Job Summary

The Confined Space Entry (CSE) Technician is responsible for safely performing cleaning, inspection, maintenance, and related activities inside confined spaces such as vessels, tanks, and process equipment. This role requires strict adherence to confined space entry permits, safety procedures, and applicable regulatory and company requirements.

Key Responsibilities

• Comply with all confined space entry permits, hazard assessments, and job-specific procedures.
• Participate in pre-job meetings, toolbox talks, and hazard reviews prior to entry.
• Enter vessels and tanks to perform cleaning, debris removal, inspection, and minor maintenance tasks.
• Conduct work using hand tools, vacuum hoses, high-pressure cleaning equipment, and approved chemicals.
• Continuously monitor atmospheric conditions as directed and immediately report unsafe conditions.
• Maintain communication with attendants, entry supervisors, and safety personnel at all times.
• Use and maintain required personal protective equipment (PPE), including respiratory protection.
• Assist with setup and teardown of ventilation, lighting, access, and rescue equipment.
• Follow lockout/tagout and positive isolation requirements before and during entry.
• Exit confined spaces immediately upon instruction or if unsafe conditions are identified.

Typical Confined Spaces

• Storage tanks (crude, produced water, slop, and process tanks)
• Process vessels and separators
• Heat exchangers and columns
• Pits, sumps, and similar enclosed spaces

Hazards and Conditions

• Oxygen-deficient or oxygen-enriched atmospheres
• Flammable or explosive gases and vapours (LEL)
• Toxic substances (e.g., H2S, VOCs, benzene)
• Engulfment or entrapment hazards
• Slippery, uneven, or restricted working surfaces
• Limited visibility and restricted movement

Required Training and Competency

• Valid Confined Space Entry certification
• H2S Alive or equivalent gas awareness training
• Respiratory protection training and fit testing
• Hazard assessment and safe work procedure awareness
• Emergency response and rescue awareness

Physical Requirements

Must be physically capable of working in tight, confined areas, including crawling, kneeling, and climbing ladders. Ability to wear respiratory protection and protective suits for extended periods is required.

Authority to Stop Work

All confined space entry personnel have the authority and responsibility to stop work if unsafe conditions are identified or if permit conditions are not being met.

FQE are taking CV’s for TAR team for West Africa starting approx. June 2026, the planning and preparation phase will be for 12 months onshore followed by the execution phase offshore 5 weeks approx.

f you have 10+ years experience in the following disciplines in TAR planning and preparation and wish to be considered please forward you’re up to date cv and indicate which position you would be interested in, these are the only details available at this stage, please only apply if you have the relevant experience in the positions for major TAR’s.

• Shutdown Manager
• Planning Engineer
• Rotating Equipment Engineer
• E&I Engineer
• Mechanical Engineer
• Process Engineer
• QHSE Manager – familiar with all aspects of QHSE including PTW organization

Résumé

Gérer la logistique sur le terrain, notamment la main-d'œuvre, l'équipement, les relations avec la clientèle, la facturation, la sécurité et la conformité. Fournir des conseils techniques et un soutien en matière de nettoyage chimique aux techniciens de terrain. Assurer le mentorat et l'encadrement par le biais de formations sur le terrain et de l'expérience afin d'accroître leurs connaissances et leurs compétences, et d'examiner le travail accompli. Communiquer en permanence avec le client afin d'établir des relations et de superviser les travaux sur place.

Principales responsabilités

• Superviser et contrôler les projets de nettoyage chimique et les employés sur les chantiers.
• Fournir une formation technique pratique en rapport avec les services de l'entreprise.
• Conserver les registres et préparer les rapports relatifs aux opérations de service. C'est-à-dire les registres des véhicules, des conducteurs, des services, etc.
• Participer à l'élaboration des procédures sur le terrain avec les ingénieurs de terrain et de projet.
• Préparez les camions, l'équipement, les matériaux et les fournitures nécessaires pour chaque tâche.
• Livrer le matériel et les équipements sur les chantiers. Aider et guider les autres dans l'installation des équipements.
• Entretenir, réparer et dépanner les équipements.
• Participer et diriger les réunions d'équipe.
• Participer et maintenir les évaluations des risques sur le terrain (FLRA).
• Veiller à ce que toutes les politiques et pratiques en matière de santé et de sécurité soient respectées.
• Toutes les tâches doivent être accomplies de manière sûre et efficace, conformément au programme de sécurité comportementale de FourQuest.

Formation et expérience

• Compréhension de l'exécution des services de nettoyage chimique.
• La connaissance des activités de pré-mise en service ou des services liés aux pipelines est un atout.
• Permis de classe 5 avec un dossier de conduite vierge.
• Permis de conduire de classe 1 et/ou 3 avec expérience hors route et aptitudes mécaniques, un atout.
• Les certificats requis pour travailler dans les champs pétrolifères comprennent le SIMDUT, le TMD, le H2S Alive et les premiers soins.

Attributs

Caractéristiques personnelles

• Faites preuve du plus haut niveau d'intégrité et d'honnêteté.
• Axé sur les objectifs à atteindre grâce à une équipe de professionnels de la vente désignés.
• Motivé, entreprenant, persévérant et déterminé.
• Faire preuve d'un niveau élevé d'énergie et d'activité.
• Rechercher les résultats commerciaux et l'apprentissage continu.
• Favorisez l'esprit d'équipe en travaillant en collaboration avec les autres.

Compétences professionnelles

• Aptitudes mécaniques et capacité à résoudre les problèmes liés aux équipements si nécessaire.
• Capacité à prêter une attention particulière aux détails.
• Capacité à travailler seul et avec d'autres personnes.
• Bonnes aptitudes à la communication pour comprendre des instructions concises.
• Capacité à travailler efficacement et efficacement sous pression.
• Endurance physique et résistance nécessaires pour effectuer des tâches répétitives.

Si vous ne trouvez pas actuellement de poste correspondant à votre profil, vous pouvez envoyer votre CV en précisant le type de poste que vous recherchez. Nous conserverons tous les CV dans nos dossiers et vous contacterons si un poste correspondant se libère.